Zen Sand Flow Meditation: Chaoshan Hand-Carved Wooden Kinetic Art for Focus & Stress Relief

​​Maintenance & Air Pressure Adjustment Guide for Sandscape Art​​

​​Initial Setup​​

1. Upon receiving the product, gently flip it several times to activate sand flow. Avoid frequent syringe adjustments, as overuse may widen the injection port.

​​Air Pressure Adjustment (Due to Temperature/Altitude Changes)​​
Included syringe tool ensures optimal sand flow (0.5-2cm bubble height range for ideal viscosity).

​​Adjusting SLOW Sand Flow (Remove Air):​​
① Locate the injection port on the frame edge.
② Tilt the artwork to gather bubbles near the port (ensure sand is fully displaced).
③ Insert syringe and slowly withdraw air until desired flow speed is achieved.

​​Adjusting FAST Sand Flow (Add Air):​​
Follow steps ①-② above, then gently inject air through the syringe.

​​Bubble Management​​
⚠️ If large bubbles form:

1. Gently shake horizontally to disperse into smaller bubbles.
2. Add distilled/cooled boiled water (see “Refill Guide” below) to compensate for evaporation.

​​⚠️ Water Refill Guide​​

1. ​​Use only distilled or cooled boiled water​​ (prevents mineral buildup).
2. Withdraw 1-2ml air via syringe to create negative pressure.
3. ​​Inject water SLOWLY​​ (＜3ml per session) to avoid overpressure.
4. ​​CRITICAL​​: Excess air/water volume may cause glass rupture.